Sanger Metal
Main Page > Products > Inter Product > IPNM(P) - VERTICAL TRANSPORT OF PLATES: MATERIALS WHICH CANNOT BE DAMAGED 

IPNM(P) - VERTICAL TRANSPORT OF PLATES: MATERIALS WHICH CANNOT BE DAMAGED 



Model IPNM
Model IPNM
The IPNM safety lifting clamps (NM stands for non marring) can be used in almost all sectors of industry where during lifting or transfer no damage to the material is permitted.

The jaws of the lifting clamp are made of a - synthetic material - with a very high coefficient of friction so that damageable plates can be held firmly, and transfered in either a vertical or horizontal position.

This also applies for materials with a very smooth surface, composites and coated plates or plates with a very hard (impenetrable) surface.

You can also choose for a version with protection cap (model IPNM/P).
Model IPNM/P
Model IPNM/P


Before using the clamp always read the instruction manual supplied with the clamp.

Model
Order
No.
WLL
per pce
in L.
Jaw
Dimensions in mm
Weight
per pce
kg
A
B
C
D
E
F
G
H
J
K
0,5-IPNM
3276
0,5
0-10
74
149

205

30
128
60
38
-
10

2,5

1-IPNM
3277
1,0
0-20
86
187

258

30
170
80
50
-
10

4,1

0,5-IPNM/P
3278
0,5
0-10
82
157

213

30
145
68
48
-
10

2,8

1-IPNM/P
3279
1,0
0-20
97
195

268

30
205
82
60
-
10

4,5



Spare parts for IPNM(P)
safety lifting clamps:

Order
no.

1. body complete

1041
2. hoisting eye complete 1235
3. camsegment complete 1234
4. latch complete 1233
5. spring for latch complete 1063
6. camsegment shaft complete 1046
7. hoisting eye shaft complete 1047
8. clamping arm complete 0392

10. pivot complete (round)

0098

28. guiding spring

1354
48. hinge pin complete 1380
50. clamping plate complete 1691
55. bumber strip complete 1668
Drukuj
Projekt i realizacja, hosting: Stopklatka.pl
www.sangermetal.com