IPNM(P) - VERTICAL TRANSPORT OF PLATES: MATERIALS WHICH CANNOT BE DAMAGED
 | |
Model IPNM |
|
The IPNM safety lifting clamps
(NM stands for non marring) can be used in almost all sectors
of industry where during lifting or transfer no damage to
the material is permitted.
The jaws of the lifting clamp are made of a - synthetic material
- with a very high coefficient of friction so that damageable
plates can be held firmly, and transfered in either a vertical
or horizontal position.
This also applies for materials with a very smooth surface,
composites and coated plates or plates with
a very hard (impenetrable) surface.
You can also choose for a version with protection cap (model IPNM/P). |
 | |
Model IPNM/P |
|
Before using the clamp always read the instruction manual supplied with the clamp.
Model |
Order
No. |
WLL
per pce
in L. |
Jaw |
Dimensions
in mm |
Weight
per pce
kg |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
| 0,5-IPNM |
3276 |
0,5 |
0-10 |
74 |
149 |
205 |
30 |
128 |
60 |
38 |
- |
10 |
2,5 |
| 1-IPNM |
3277 |
1,0 |
0-20 |
86 |
187 |
258 |
30 |
170 |
80 |
50 |
- |
10 |
4,1 |
| 0,5-IPNM/P |
3278 |
0,5 |
0-10 |
82 |
157 |
213 |
30 |
145 |
68 |
48 |
- |
10 |
2,8 |
| 1-IPNM/P |
3279 |
1,0 |
0-20 |
97 |
195 |
268 |
30 |
205 |
82 |
60 |
- |
10 |
4,5 |
|
|
|
Spare parts for
IPNM(P)
safety lifting clamps: |
Order
no. |
1. body complete |
1041 |
| 2. hoisting eye complete |
1235 |
| 3. camsegment complete |
1234 |
| 4. latch complete |
1233 |
| 5. spring for latch complete |
1063 |
| 6. camsegment shaft complete |
1046 |
| 7. hoisting eye shaft complete |
1047 |
| 8. clamping arm complete |
0392 |
10. pivot complete (round) |
0098 |
28. guiding spring |
1354 |
| 48. hinge pin complete |
1380 |
| 50. clamping plate complete |
1691 |
| 55. bumber strip complete |
1668 |
|
|
