HWRC - DOUBLE ACTING WIRE ROPE CUTTERS
|
- Working pressure 700 Bar
- Double acting design
- Smooth guillotine cutting action
|
Hand and powered pumps suitable for these cutters are detailed on pages 21 to 32.
|
» Cuts high tensile locked coil wire rope and steel bar
» Cutting capacities from 38 to 90mm diameter wire rope
» Cutting capacities from 25 to 50mm diameter steel bar
|
|
The HWRC range of hydraulic cutters is specifically designed and manufactured for cutting high tensile locked coil wire rope and solid steel bar. Maximum cutting capacities range from 38 to 90mm diameter wire rope and 25 to 50mm diameter 28 tonnes tensile solid steel bar. All models incorporate a double acting hydraulic cylinder, suitable for working pressures up to 700 bar and an open jaw design cutting head (see pictures below) for easy access to the material to be cut. Cutting blades and jaws are manufactured from specially toughened high tensile steel and the smooth guillotine action of the cutter greatly reduces the risk of blade jamming.
|
|
|
Step 1:
To open the cutter, swivel cutting head forward.
|
Step 2:
Position material to be cut in the cutting head slot.
|
Step 3:
Close the cutting head by swivelling it back to it's original postion and secure behind the latch.
|
Model
number |
Cutting capacity |
Oil
capacity
cm3 |
Weight
kg |
|
Dimensions in mm |
Wire rope
mm 0 |
Solid steel bar
mm 0 |
Length |
Width |
Height |
HWRC1115 |
38 |
25 |
267 |
26 |
|
305 |
195 |
254 |
HWRC1125 |
63 |
50 |
874 |
65 |
|
419 |
245 |
330 |
HWRC1136 |
90 |
50 |
1242 |
75 |
|
495 |
245 |
356 |
|