G-2130 S-2130 - BOLT TYPE ANCHOR SHACKLES
|
Bolt Type Anchor shackles with thin
head bolt - nut with cotter pin. Meets the
performance requirements of Federal
Specification RR-C-271D Type IVA,
Grade A, Class 3, except for those provi-
sions required of the contractor. For
additional information, see page 361.
|
|
- Working Load Limit permanently shown on every shackle.
Capacities 1/3 thru 150 metrics tons.
- Forged — Quenched and Tempered, with alloy pins.
- Hot Dip galvanized or Self Colored.
- Fatigue rated.
- Crosby products meet or exceed all requirements of ASME B30.26
including identification, ductility, design factor, proof load and
temperature requirements. Importantly, Crosby products meet other
critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26.
- Sizes 1/2t - 25t meet the performance requirements of EN13889:2003
- Shackles 55 metric tons and smaller can be furnished proof tested with
certificates to designated standards, such as ABS, DNV, Lloyds, or
other certification when requested at time of order.
- Shackles 85 metric tons and larger can be provided as follows.
- Non Destructive Tested
- Serialized Pin and Bow
- Material Certification (Chemical) Certification must be
requested at time of order.
- Look for the Red Pin® . . . the mark of genuine Crosby quality.
Nomina
Size
(in.) |
Working
Load Limit
(t) * |
Stock No. |
Weigh
Each
(kg) |
Dimensions
(mm) |
Tolerance
+/- |
С-2130 |
S-2130 |
А |
В |
С |
D |
Е |
F |
H |
L |
N |
С |
А |
3/16 |
|
1019464 |
- |
,03 |
9,65 |
6,35 |
22,4 |
4,85 |
15,2 |
14,2 |
37,3 |
24,9 |
4,85 |
1,50 |
1,50 |
1/4 |
1/2 |
1019466 |
- |
,05 |
11,9 |
7,85 |
28,7 |
6,35 |
19,8 |
15,5 |
46,7 |
32,5 |
6,35 |
1,50 |
1,50 |
5/16 |
3/4 |
1019468 |
- |
,10 |
13,5 |
9,65 |
31,0 |
7,85 |
21,3 |
19,1 |
53,0 |
37,3 |
7,85 |
3,30 |
1,50 |
3/8 |
1 |
1019470 |
- |
,15 |
16,8 |
11,2 |
36,6 |
9,65 |
26,2 |
23,1 |
63,0 |
45,2 |
9,65 |
3,30 |
1,50 |
7/16 |
1-1/2 |
1019471 |
- |
,22 |
19,1 |
12,7 |
42,9 |
11,2 |
29,5 |
26,9 |
74,0 |
51,5 |
11,2 |
3,30 |
1,50 |
1/2 |
2 |
1019472 |
1019481 |
,36 |
20,6 |
16,0 |
47,8 |
12,7 |
33,3 |
30,2 |
83,5 |
58,5 |
12,7 |
3,30 |
1,50 |
5/8 |
3-1/4 |
1019490 |
1019506 |
,62 |
26,9 |
19,1 |
60,5 |
16,0 |
42,9 |
38,1 |
106 |
74,5 |
17,5 |
6,35 |
1,50 |
3/4 |
4-3/4 |
1019515 |
1019524 |
1,23 |
31,8 |
22,4 |
71,5 |
19,1 |
51,0 |
46,0 |
126 |
89,0 |
20,6 |
6,35 |
1,50 |
7/8 |
6-1/2 |
1019533 |
1019542 |
1,79 |
36,6 |
25,4 |
84,0 |
22,4 |
58,0 |
53,0 |
148 |
102 |
24,6 |
6,35 |
1,50 |
1 |
8-1/2 |
1019551 |
1019560 |
2,28 |
42,9 |
28,7 |
95,5 |
25,4 |
68,5 |
60,5 |
167 |
119 |
26,9 |
6,35 |
1,50 |
1-1/8 |
9-1/2 |
1019579 |
1019588 |
3,75 |
46,0 |
31,8 |
108 |
28,7 |
74,0 |
68,5 |
190 |
131 |
31,8 |
6,35 |
1,50 |
1-1/4 |
12 |
1019597 |
1019604 |
5,31 |
51,5 |
35,1 |
119 |
31,8 |
82,5 |
76,0 |
210 |
146 |
35,1 |
6,35 |
1,50 |
1-3/8 |
13-1/2 |
1019613 |
1019622 |
7,18 |
57,0 |
38,1 |
133 |
35,1 |
92,0 |
84,0 |
233 |
162 |
38,1 |
6,35 |
3,30 |
1-1/2 |
17 |
1019631 |
1019640 |
9,43 |
60,5 |
41,4 |
146 |
38,1 |
98,5 |
92,0 |
254 |
175 |
41,1 |
6,35 |
3,30 |
1-3/4 |
25 |
1019659 |
1019668 |
15,4 |
73,0 |
51,0 |
178 |
44,5 |
127 |
106 |
313 |
225 |
57,0 |
6,35 |
3,30 |
2 |
35 |
1019677 |
1019686 |
23,7 |
82,5 |
57,0 |
197 |
51,0 |
146 |
122 |
348 |
253 |
61,0 |
6,35 |
3,30 |
2-1/2 |
55 |
1019695 |
1019702 |
44,6 |
105 |
70,0 |
267 |
66,5 |
184 |
145 |
453 |
327 |
79,5 |
6,35 |
6,35 |
3 |
†85 |
1019711 |
- |
70 |
127 |
82,5 |
330 |
76,0 |
200 |
165 |
546 |
365 |
92,0 |
6,35 |
6,35 |
3-1/2 |
† 120 ‡ |
1019739 |
- |
120 |
133 |
95,5 |
372 |
92,0 |
229 |
203 |
626 |
419 |
105 |
6,35 |
6,35 |
4 |
† 150 ‡ |
1019757 |
- |
153 |
140 |
108 |
368 |
104 |
254 |
229 |
653 |
468 |
116 |
6,35 |
6,35 |
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load
Limit. For Working Load Limit reduction due to side loading applications, see page 68. † Individually Proof Tested with
certification. ‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.
|