G-2160 - "WIDE BODY" SHACKLES

Patented

• All sizes Quenched and Tempered for maximum strength.
• Forged alloy steel from 30 through 300 metric tons.
• Cast alloy steel from 400 through 1000 metric tons.
• Sizes 300 tons and smaller are proof tested to 2 times the Working
  Load Limit.
• Sizes 400 tons and larger are tested to 1.33 times Working Load Limit.
• All ratings are in metric tons, embossed on side of bow.
• Bows and pins are furnished Dimetcoted. All Pins are Dimetcoted
  then painted red.
• Greatly improves wearability of wire rope slings.
• Can be used to connect HIGH STRENGTH Synthetic Web Slings,
  HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
• Increase in shackle bow radius provides minimum 58% gain in
  sling bearing surface and eliminates need for a thimble.
• Increases usable sling strength minimum of 15%.
• Pin is non-rotating, with weld on handles for easier use
  (300t and larger).
• All 2160 shackles are individually proof tested and magnetic
  particle inspected. Crosby certification available at time of order.
• Crosby products meet or exceed all requirements of ASME
  B30.26 including identification, ductility, design factor, proof load
  and temperature requirements. Importantly, Crosby products
  meet other critical performance requirements including fatigue life,
  impact properties and material traceability, not addressed by
  ASME B30.26.
  
• Shackles requiring ABS, DNV, Lloyds and other certifications are
  available upon special request and must be specified at time of order.
• Shackles are produced in accordance with certified lifting appliance
  requirements.
  
• Non Destructive Testing
  
• Serialization / Identification
  
• Material Testing (Physical / Chemical / Charpy)
  
• Proof Testing