IPU10/H - VERTICAL TRANSPORT OF PLATES: VERY HARD MATERIALS
 | |
Model IPU10/H |
|
IP10/H and IPU10/H vertical safety
lifting clamps are suitable for the lifting, turning (180°) and
vertical transfer of steel plates and sections with extra
hard surface-hardness. The lifting clamp is suitable
for the lifting of materials with a surface hardness up to
max. 47 Re (450 HB). These lifting clamps are fitted with a
pivot and a camsegment made of extra hard wear-resistant material.
Available in two versions:
1.IPU10/H: fitted with a hinged hoisting eye moving
in all directions. Further specifications: see model IPU10.
For a correct use of the clamp, see fig. 2 & 3.
2.IP10/H: fitted with a fixed hoisting eye.
Further specifications: see model IP10. For a correct use of
the clamp, see fig. 4 & 5.
Higher WLL and different jaw-apertures upon demand.
Minimum load permitted:
10% of the WLL applying to plate surface hardness 47 Re (1520
N/mm²). |
|
Before using the clamp always read the instruction manual supplied with the clamp.
Model |
Order
No. |
WLL
per pce
in L. |
Jaw |
Dimensions
in mm |
Weight
per pce
kg |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
With
universal hoisting eye |
| 0,5-IPU10/H |
2175 |
0,5 |
0-16 |
44 |
128 |
228 |
30 |
115 |
41 |
28 |
- |
10 |
1,9 |
| 1-IPU10/H |
2177 |
1,0 |
0-35 |
78 |
201 |
372 |
70 |
190 |
61 |
55 |
- |
16 |
7,6 |
| 2-IPU10/H |
2165 |
2,0 |
0-40 |
100 |
253 |
445 |
75 |
225 |
78 |
60 |
- |
20 |
14,8 |
| 3-IPU10/H |
2167 |
3,0 |
0-40 |
100 |
253 |
445 |
75 |
232 |
82 |
65 |
- |
20 |
16,0 |
| 4,5-IPU10/H |
2169 |
6,0 |
0-50 |
126 |
302 |
525 |
80 |
292 |
84 |
95 |
- |
20 |
24,0 |
With
fixed hoisting eye |
| 0,5-IP10/H |
2174 |
0,5 |
0-16 |
44 |
128 |
207 |
30 |
115 |
41 |
28 |
- |
10 |
1,8 |
| 1-IP10/H |
2176 |
1,0 |
0-35 |
78 |
201 |
336 |
70 |
190 |
61 |
55 |
- |
16 |
6,8 |
| 2-IP10/H |
2164 |
2,0 |
0-40 |
100 |
253 |
436 |
75 |
225 |
78 |
60 |
- |
20 |
13,8 |
| 3-IP10/H |
2166 |
3,0 |
0-40 |
100 |
253 |
436 |
75 |
232 |
82 |
65 |
- |
20 |
15,0 |
| 4,5-IP10/H |
2168 |
6,0 |
0-50 |
126 |
302 |
515 |
80 |
292 |
84 |
95 |
- |
20 |
23,5 |
|
|
|
Spare parts for
IP(U)10/H
safety lifting clamps: |
Order
no. |
1. body complete |
1041 |
2. hoisting eye complete |
1235 |
3. camsegment complete |
1234 |
4. latch complete |
1233 |
5. spring for latch complete |
1063 |
6. camsegment shaft complete |
1046 |
7. hoisting eye shaft
complete |
1047 |
10. pivot complete (round) |
0098 |
10. pivot complete (oval) |
0099 |
|
|
