National Hydraulic Swaging Machines
National offers the highest quality and most complete line of Hydraulic Swaging Machines specifically designed to be used to swage fittings on wire rope.
3 Capacities to Fit your Requirements
500 Tons
1000 Tons
1500 Tons
| 1500 Ton Hydraulic Swaging Machines
Approximate weight 34,500 lbs. Overall height 8 ft. 6 in.
Fast advance and retract speed.
Automatic slow, precision swaging speed. |
The following features of National Hydraulic Swaging Machines offer a number of advantages for high production sling shops:
- A dual hydraulic system which combines the use of high speed and low pressure to bring dies into position; and the low speed and high pressure necessary for ideal swaging control.
- Adjustable tonnage control, so tonnage can be set to match die block Working Load Limit.
- Four column wide stance which provides the operator ample working clearance between columns and a large area for in-process sling storage.
- Vertical swage action which gives an equalized press on the fitting to produce uniform high quality.
- Self locating spring locks snap the shoe-type dies into place for quick set-up and change.
- The National four column wide stance Hydraulic Swaging Machines, each equipped with an up-acting ram, have two side cylinders for fast approach and return of the main ram. They come in three swaging capacities.
- 500 ton (4450 kN)
- 1000 ton (8900 kN)
- 1500 ton (13350 kN)
Swaging Machine Capacity Chart for Swage Sleeves, Ferrules & Buttons
Hydraulic
Swaging
Machine Size |
Swaging
Method |
Die Size (in.) |
Largest Fitting Allowed to be Swaged (in.) |
S-505
Sleeve |
S-506
Sleeve |
S-51
Ferrules |
S-409
Buttons |
500 Ton |
Full Die |
2-1/2 x 5 Mark Series
4 x 7
5 x 7 |
1-1/2 |
1-1/4* |
9/16* |
7/8* |
1000 Ton |
Full Die |
4 x 7
5 x 7 |
2-1/2 |
1-1/4* |
9/16* |
1-1/4* |
1500 Ton |
Full Die |
5 x 7
6 x 12 |
3-1/2 |
1-1/4* |
9/16* |
1-1/4* |
3000 Ton |
Full Die |
6 x 12 |
4-1/2 |
1-1/4* |
9/16* |
1-1/4* |
* Largest size fitting available.
|
Swaging Machine Capacity Chart for S-501 & S-502 Swage Sockets
Hydraulic
Swaging
Machine Size |
Swaging
Method |
Die Size (in.) |
Largest Fitting
Allowed
to be Swaged
(in.) |
500 Ton |
Full Shank |
2-1/2 x 5 Mark Series
4 x 7
5 x 7 |
3/4 |
|
Progressive |
4 x 7
5 x 7 |
1-1/4 |
1000 Ton |
Full Shank |
4 x 7
5 x 7 |
1 |
|
Progressive |
4 x 7
5 x 7 |
1-1/2 |
1500 Ton |
Full Shank |
5 x 7
6 x 12 |
1-1/4 |
|
Progressive |
5 x 7
6 x 12 |
2 |
3000 Ton |
Full Shank |
6 x 12 |
2 |
|
Progressive |
6 x 12 |
2-1/4 |
* Largest size fitting available. |
|