Заглавная страница >
КАТАЛОГИ >
КАТАЛОГ 2 >
Концевые элементы тросов >
КОНЦЕВЫЕ ЭЛЕМЕНТЫ ТРОСОВ - ВВЕДЕНИЕ
КОНЦЕВЫЕ ЭЛЕМЕНТЫ ТРОСОВ - ВВЕДЕНИЕMaterialsOur standard socket range is available in cast alloy steel with high machanical properties. The Shortbow range is made of high alloy steel with extremely high mechanical properties. All of our sockets are suitable for usage in a low temperature enviroment. All of the materials meet the requirements of an impact value of >42 Joule/-20°C Charpy-V. Testing Manufacturers certificate Material certificates Finishing
Warning and application instructions
•Always mount the loaded part of the wire in the centre line of the pin (see figures next page).
Spelter and Short Bow Sockets •Be sure that the wire-socket connection is in the center line of the socket. •Proper spelter socket termination have an effecienty of 100% of the breaking load of the wire. This can be limitated by the minimum braking load of the socket (MBL), as mentioned in the tables. For socketing please read the general socketing instructions. Due to constant improvements of our products, we reserve the right to change specifications accordingly. General Socketing instructions •Before use please read carefully the instructions of the resin manufacturer. Incorrect use of the resin or spelter material can result in an unsafe termination. More information can also be obtained from your wire rope supplier. •Always clear the wire rope broom and socket basket from dirt and grease. •Make certain that the broomed wires are evenly spaced in the basket, and that the wire and basket are aligned with one another. •When using white metal or zinc, do not preheat the socket to more then 300°C (570°F). •Make sure the base of the socket is properly sealed. This to prevent resin leakage, which may cause voids. •Never use an assembly before the resin is fully hardened. •Socketing should always be done by a qualified person. Required resin volume for socketing wire rope terminations
|