Sanger Metal
Strona Główna > Produkty > SZAKLE > Szakla G2170E do zawiesi GROMMET

Szakla G2170E do zawiesi GROMMET

All sizes Quenched and Tempered for maximum strength.


All sizes Cast alloy steel.


Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit.

500 metric tons tested to 1.33 times the Working Load Limit.


All ratings are in metric tons, embossed on side of bow.


G-2170 bows are furnished Dimetcoted and pins are Dimetcoted, then painted red.

S-2170 bows and pins are painted red.


All sizes are RFID Equipped in bow and pin


Designed for use with single or double large diameter grommets.


Extra large sling contact area improves efficiency of the grommet sling.


Utilizes new Easy Loc® shackle bolt system


Large machined flat on ears that can be drilled and tapped for adapting other accessories.


HR-1000 Hoist Ring in Bow standard for easy transporting


Provides a bearing surface that is at least 5 times that of a round shackle.


Increases usable sling strength minimum of 60% and greatly improves life of grommet slings.



Bow and bolt are certified to meet charpy impact testing of 42 joules (31 ft-lbs.) min. ave. at -20 degree C (-4 degree F).


All 2170 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order.


Shackles requiring ABS, Lloyds, and other certifications are available upon special request and must be specified at time of order.


All 2170 shackles can meet requirements of DNV Standard for Certification of Lifting Appliances upon special

request and must be specified at time of order.

Serialization / Identification

Material Testing (Physical / Chemical / Charpy)

Proof Testing


Look for the Red Pin®....the mark of genuine Crosby quality.

Projekt i realizacja, hosting: