US-422T Utility Wedge Socket
|
Wedge sockets meet the performance
requirements of Federal Specification
RR-S-550D, Type C, except those provi
sions required of the contractor. Meets
the performance requirements of
EN13411-6:2003. For additional infor-
mation, see page 361.
|
- Basket is cast steel.
- Wedge socket terminations have an efficiency rating of 80% based on the catalog
strength of XXIP wire rope.
- Crosby products meet or exceed all requirements of ASME B30.26 including
identification, ductility, design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical performance requirements
including fatigue life, impact properties and material traceability, not addressed
by ASME B30.26.
- Individually magnetic particle inspected.
- Pin diameter and jaw opening allows wedge and socket to be used in conjuction
with open swage and spelter sockets.
- Secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss or
"Punch out" of the wedge.
- Eliminates the need for an extra piece of rope, and is easily installed.
- The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to
fatigue.
- The tail, which is secured by the base of the clip and the wedge, is left undeformed
and available for reuse.
- Incorporates Crosby’s patented QUIC-CHECK® "Go" and "No-Go" feature cast into
the wedge. The proper size rope is determined when the following criteria are met:
- 1) The wire rope should pass thru the "Go" hole in the wedge.
- 2) The wire rope should NOT pass thru the "No-Go" hole in the wedge.
- Utilizes standard Crosby Red-U-Bolt® wire rope clip.
- Standard S-421 wedge socket can be retrofitted with the new style TERMINATOR™
wedge.
- Available with Bolt, Nut, and Cotter Pin.
- U.S. patent 5,553,360 and foreign equivalents.
S-421T Wedge Sockets
Wire Rope
Dia.
(mm.) |
S-421T
Stock
No.* |
Weight
Each
(kg.) |
S-421TW
Stock No.
Wedge
Only |
Wedge
Only
Weight
Each
(kg) |
Optional G-4082
Bolt, Nut & Cotter |
G-4082
Stock
No. |
G-4082
Weight Each
(kg.) |
9-10 |
1035000 |
1,44 |
1035555 |
,23 |
1092227 |
,17 |
11-13 |
1035009 |
2,79 |
1035564 |
,48 |
1092236 |
,31 |
14-16 |
1035018 |
4,40 |
1035573 |
,81 |
1092254 |
,52 |
18-19 |
1035027 |
6,58 |
1035582 |
1,18 |
1092281 |
,86 |
20-22 |
1035036 |
9,75 |
1035591 |
1,82 |
1092307 |
1,46 |
24-26 |
1035045 |
13,9 |
1035600 |
2,44 |
1092325 |
2,44 |
28 |
1035054 |
20,5 |
1035609 |
3,56 |
1092343 |
3,40 |
30-32 |
1035063 |
29,4 |
1035618 |
4,80 |
1092372 |
4,70 |
Wire
Rope
Dia.
(mm.)* |
S-421T
Stock No.* |
А |
В |
С |
D |
G |
Н |
J† |
K† |
L |
Р |
R |
S |
Т |
U |
V |
9-10 |
1035000 |
145 |
69,1 |
20,6 |
20,6 |
35,1 |
77,7 |
198 |
47,8 |
22,4 |
39,6 |
11,2 |
54,1 |
11,2 |
31,8 |
35,1 |
11-13 |
1035009 |
175 |
88,1 |
25,4 |
25,4 |
41,1 |
95,5 |
226 |
32,0 |
26,9 |
49,3 |
12,7 |
65,0 |
13,5 |
44,5 |
47,8 |
14-16 |
1035018 |
210 |
109 |
31,8 |
30,2 |
53,8 |
114 |
273 |
50,5 |
31,0 |
57,2 |
14,2 |
82,6 |
17,5 |
51,0 |
55,5 |
18-19 |
1035027 |
251 |
130 |
38,1 |
35,1 |
62,0 |
134 |
314 |
61,2 |
35,6 |
66,8 |
16,8 |
92,2 |
19,8 |
59,5 |
65,0 |
20-22 |
1035036 |
286 |
149 |
44,5 |
41,4 |
68,5 |
156 |
365 |
63,0 |
42,4 |
79,5 |
19,1 |
109 |
22,4 |
68,5 |
74,5 |
24-26 |
1035045 |
325 |
161 |
51,0 |
51,0 |
74,7 |
177 |
414 |
77,2 |
51,0 |
95,5 |
22,4 |
119 |
26,2 |
73,0 |
83,5 |
28 |
1035054 |
365 |
176 |
57,0 |
57,0 |
84,0 |
194 |
466 |
65,0 |
57,0 |
108 |
25,4 |
138 |
27,9 |
82,6 |
90,5 |
* S-421T TERMINATOR™ Assembly includes Socket, Wedge, Pin and Wire Rope Clip.
† Nominal
NOTE: For intermediate wire rope sizes, use next larger size socket.
|