Sanger Metal
Strona Główna > Produkty > SANGER METAL Crosby > Szakle > G-209 S-209 - SCREW PIN ANCHOR SHACKLES

G-209 S-209 - SCREW PIN ANCHOR SHACKLES


 

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provi- sions required of the contractor.


  • Capacities 1/3 thru 55 metric tons.
  • Forged - Quenched and Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot Dip galvanized or Self Colored.
  • Fatigue rated.
  • Shackles can be furnished proof tested with certificates to designated
    standards, such as ABS, DNV, Lloyds, or other certification. Charges
    for proof testing and certification available when requested at the time
    of order.
  • Shackles are Quenched and Tempered and can meet DNV impact
    requirements of 42 joules at -20 C.
  • Sizes 1/2t - 25t meet the performance requirements of EN13889:2003
  • Crosby products meet or exceed all requirements of ASME B30.26
    including identification, ductility, design factor, proof load and
    temperature requirements. Importantly, Crosby products meet other
    critical performance requirements including fatigue life, impact
    properties and material traceability, not addressed by ASME B30.26.
  • Look for the Red Pin® . . . the mark of genuine Crosby quality.

Nominal
Size
(in.)
Working
Load
Limit
(t) *
Stock No. Weight
Each
(kg)
Dimensions
(mm)
Tolerance
+ / -
G-209 S-209 А В С D Е F G Н L М Р С А
3/16 1/3 1018357 - ,03 9,65 6,35 22,4 4,85 15,2 14,2 24,9 37,3 4,06 28,4 4,85 1,50 1,50
1/4 1/2 1018375 1018384 ,05 11,9 7,85 28,7 6,35 19,8 15,5 32,5 46,7 4,85 35,1 6,35 1,50 1,50
5/16 3/4 1018393 1018400 ,09 13,5 9,65 31,0 7,85 21,3 19,1 37,3 53,0 5,60 42,2 7,85 3,30 1,50
3/8 1 1018419 1018428 ,14 16,8 11,2 36,6 9,65 26,2 23,1 45,2 63,0 6,35 51,5 9,65 3,30 1,50
7/16 1-1/2 1018437 1018446 ,17 19,1 12,7 42,9 11,2 29,5 26,9 51,5 74,0 7,85 60,5 11,2 3,30 1,50
1/2 2 1018455 1018464 ,33 20,6 16,0 47,8 12,7 33,3 30,2 58,5 83,5 9,65 68,5 12,7 3,30 1,50
5/8 3-1/4 1018473 1018482 ,62 26,9 19,1 60,5 16,0 42,9 38,1 74,5 106 11,2 85,0 17,5 6,35 1,50
3/4 4-3/4 1018491 1018507 1,07 31,8 22,4 71,5 19,1 51,0 46,0 89,0 126 12,7 101 20,6 6,35 1,50
7/8 6-1/2 1018516 1018525 1,64 36,6 25,4 84,0 22,4 58,0 53,0 102 148 12,7 114 24,6 6,35 1,50
1 8-1/2 1018534 1018543 2,28 42,9 28,7 95,5 25,4 68,5 60,5 119 167 14,2 129 26,9 6,35 1,50
1-1/8 9-1/2 1018552 1018561 3,36 46,0 31,8 108 29,5 74,0 68,5 131 190 16,0 142 31,8 6,35 1,50
1-1/4 12 1018570 1018589 4,31 51,5 35,1 119 32,8 82,5 76,0 146 210 17,5 156 35,1 6,35 1,50
1-3/8 13-1/2 1018598 1018605 6,14 57,0 38,1 133 36,1 92,0 84,0 162 233 19,1 174 38,1 6,35 3,30
1-1/2 17 1018614 1018623 7,80 60,5 41,4 146 39,1 98,5 92,0 175 254 20,6 187 41,1 6,35 3,30
1-3/4 25 1018632 1018641 12,6 73,0 51,0 178 46,7 127 106 225 313 25,4 231 57,0 6,35 3,30
2 35 1018650 1018669 20,4 82,5 57,0 197 53,0 146 122 253 348 31,0 263 61,0 6,35 3,30
2-1/2 55 1018678 1018687 38,9 105 70,0 267 69,0 184 145 327 453 35,1 330 79,5 6,35 6,35

Szakla Omega bez zabezpieczenia G209
Drukuj
Projekt i realizacja, hosting: Stopklatka.pl
www.sangermetal.com