Crosby Swivel Hoist Ring Data Form - HR125 & HR125M Hoist Ring

Date:

CG #:

Crosby Quote Number:

Customer #:

Contact:

Distributor's Names:

Distributor's Fax Number:

Distributor's Phone Number:

Quantity Requested:

Distributor's P.O. #

Crosby Representative:

1. Determine the Type of Threads required on the Hoist Ring - Metric or UNC, UNF, Etc. NOTE - NOT DESIGNED FOR PIPE, ACME OR TAPEREDS THREADS.

2. Determine the Working Load Limit of the requested Hoist Ring.

3. Determine Bolt Diameter - The diameter of the required bolt.

4. Determine Effective Thread Length -This is the length the threads must be in order to fully engage, or project through, the work piece. NOTE; If the Effective Thread Length is not known, the Length of Bolt is required.

5. Determine Length of the Bolt -The over all length of the bolt as measured from under the head

of the bolt. NOTE: If the Effective Thread Length is not known, the Length of the bolt is required.

6. # of Thread Threads per Inch (Length Between Threads for Metric threads) - This information is required to ensure we ship proper bolt size

(i.e., 1/2 - 13, 7/8 - 9, 8 x 1.25, etc.).

1. Thread Type (Circle) U.N.C. Thread Metric Thread Other (NOT DESIGNED FOR PIPE, ACME, OR TAPERED THREADS)

2. Hoist Ring Capacity

(Workimg Load Limit)______________ lbs. Kgs.