S-360 Crosby® Firefighter Anchor Hook
|
S-360 |
S-360 Firefighter Anchor Hook |
|
This hook is intended to be used as an anchor in an engineered system for firefighter escape applications. |
|
- The hook is intended to be a component of a system specifically designed by a qualified person for firefighter escape.
- The user is to be trained in the proper usage of the system.
- After any use, the hook must be inspected. Any evidence of paint discoloration due to heat damage, hook deformation, or alteration is cause for removal from service and replacement.
- Forged Alloy Steel - Quenched and Tempered.
- This hook was designed in conjunction with members of FDNY as a component in their fire escape system.
- Each product has a Product Identification Code (PIC) for material traceability, along with the name Crosby, USA, "L", "MBS4946" and "UL Classsified" forged into it.
- Design Factor of 4.4 to 1 (per NFPA 1983).
- The bowl (saddle) of the hook is designed to easily fit around pipes or framework, and the machined tip is rated for full Working Load Limit.
- Meets the requirements of NFPA 1983 - Standard on Fire Service Life Safety Rope and System Components, for Light-use Auxilliary Equipment.
|
Patent Pending |
|
Application at time of printing |
NOTICE: Not for Overhead Lifting. |
|
S-360 Firefighter Anchor Hook |
|
Working Load Limit (t)* |
S-360 Stock No. |
Weight Each
(kg) |
Dimensions (mm) |
C |
D |
E |
G |
J |
L |
M |
P |
R |
|
.5 |
1024911 |
.36 |
11.2 |
88.1 |
12.7 |
19.8 |
54.4 |
171 |
16.8 |
58.7 |
140 |
10.4 |
* Ultimate Load is 4.4 times the Working Load Limit. |
|