S-1320 Eye Hoist Hook

• Forged Alloy Steel - Quenched and Tempered.
• Each hook has a Product Identification Code (PIC) for material traceability,
  along with the size and the name Crosby & U.S.A. in raised letters.
• 25% stronger than Grade 80.
• Engineered Flat for use with S-1325A coupler link.
• Hoist hooks incorporate two types of strategically placed markings forged into the product
  which address two (2) QUIC-CHECK® features: Deformation Indicators and Angle Indicators.
• Working Load Limit for Wire Rope forged on raised lettering pad to allow user to grind off
  quickly and easily without affecting hook.
  
• Crosby recommends grinding the Working Load Limit (which is for a 5 to 1 Design Factor)
  off the hook when using with Grade 80 or Grade 100 chain.
• Low profile hook tip.
• New integrated latch (S-4320) meets the world standard for lifting.
  
• Heavy duty stamped latch interlocks with the hook tip.
  
• High cycle, long life spring.
  
• When secured with the proper cotter pin through the hole in the tip of hook,
  meets the intent of OSHA Rule 1926.550(g) for personnel lifting.
• Suitable for use with Grade 100 and Grade 80 chain in overhead lifting applications as long as hook
  is Proof Tested as part of the chain sling assembly or as an individual component. Per ANSI B30.9-1.
• Chemical Analysis and tensile test performed on each PIC to verify chemistry and mechanical
  properties.
• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
• "Look for the Platinum Color - Crosby Grade 100 Alloy Products."