Sanger Metal

S-322 CN / S-322 AN


 



  • Forged - Quenched and Tempered.
  • Proper design, careful forging, and precision controlled quench and
    tempering gives maximum strength without excessive weight and
    bulk.
  • Every Crosby Swivel hoist hook has a pre-drilled cam which can be
    equipped with a latch. Simply purchase the latch assemblies listed
    and shown on pages 97-99. Even years after purchase of the original
    hook, latch assemblies can be added.
  • Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch
    kit. Simply purchase the latch assemblies listed and shown on pages
    97-98. Even years after purchase of the priginal hook, latch assemblies
    can be added.
  • Load rating codes stamped on each hook. 322 Swivel Hooks use the
    same load rating code as 319 Shank Hooks, see page 88 for proper
    Hook Identification Codes.
  • Hoist hooks incorporate markings forged into the product which
    address two (2) QUIC-CHECK features:
  • Deformation Indicators -- Two strategically placed marks,
    one just below the shank or eye and the other on the hook
    tip, which allows for a QUIC-CHECK measurement to
    determine if the throat opening has changed, thus indicating
    abuse or overload.
  • Angle Indicators - Indicates the maximum included angle
    which is allowed between two (2) sling legs in the hook. These
    indicators also provide the opportunity to approximate other
    included angles between two sling legs.


This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 93, 95,
103, 106, 111-115. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c) 2000.




Working
Load Limit
(t)*
S-322 CN
Stock No.
S-322 AN
Stock No.
Weight Each
(kg)
Dimensions
(mm)
Rep. Latch
Stock No.
Carbon Alloy А В С D F G H J K L М O † R S AA
,75 1,25 1048600 1048804 ,34 51,0 20,8 31,8 72,5 31,8 18,5 20,6 23,6 16,0 144 16,0 23,6 116 9,65 38,1 1096325
1 1,60 1048609 1048813 ,57 63,5 33,3 38,1 80,0 35,1 21,3 23,9 24,6 18,0 170 18,0 24,6 136 12,7 50,8 1096374
1,6 2,50 1048618 1048822 1,02 76,0 38,1 44,5 91,0 38,1 25,4 29,5 26,9 22,4 197 22,4 26,9 155 16,0 50,8 1096421
2 3,20 1048627 1048831 1,04 76,0 38,1 44,5 102 41,1 28,7 33,3 30,2 23,9 210 23,9 29,5 165 16,0 50,8 1096468
3,2 5,4 1048636 1048837 2,25 89,0 41,7 50,8 123 51,0 36,6 41,4 38,1 33,3 246 28,7 35,8 191 19,1 63,5 1096515
5 8,0 1048645 1048854 4,67 116 58,0 63,5 160 63,5 46,0 52,5 45,2 42,2 317 36,6 42,9 245 25,4 76,2 1096562
7,5 11,5 1048654 1048865 8,80 127 64,5 70,0 192 76,0 57,0 67,0 51,0 47,8 375 41,4 56,5 289 28,7 101 1096609
10 16 1048663 1048877 10,5 143 63,0 79,0 212 82,5 66,0 74,5 66,5 55,5 417 49,3 61,0 311 31,8 101 1096657
15 22 1048672 1048886 21,3 180 95,5 104 263 108 76,0 89,0 86,5 68,5 542 60,5 81,0 424 38,1 127 1096704
- 31,5 - 1025688 32,0 180 95,5 104 346 127 93,0 118 102 72,5 590 76,2 82,6 459 38,1 165 1093716
* NOTE: Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. Designed with a 5 to 1 safety factor.
Alloy swivel hooks 1.25tA-31.5tA : proof load is 2.5 times working load limit. Designed with a 4 to 1 safety factor.
† Dimensions for hooks 3/4 ton carbon thru 22 ton alloy are for S-4320 latch kits. Dimensions for hooks 31.5 ton alloy are for PL latch kit.
Drukuj
Projekt i realizacja, hosting: Stopklatka.pl
www.sangermetal.com