S-320 & S-320N EYE HOOK
- Hoist hooks incorporate markings forged into the product which address
two (2) QUIC-CHECK® features.
- Deformation Indicators -- Two strategically placed marks, one just below the shank
or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement
to determine if the throat opening has changed, thus indicating abuse or overload.
To check, use a measuring device (i.e. tape measure) to measure the distance between
the marks. The marks should align. If the measurement does not meet this criteria, the hook
should be inspected further for possible damage.
- Angle Indicators -- Indicates the maximum included angle which is allowed between
two (2) sling legs in the hook. These indicators also provide the opportunity to approximate
other included angles between two sling legs.
Hook
ID
Code(t)* |
Dimensions
(mm) |
С |
D |
F |
G |
J |
K |
М |
N |
O † |
O2†† |
Q |
T† |
T2 †† |
AA |
D |
85,0 |
72,0 |
31,8 |
18,5 |
22,9 |
16,0 |
16,0 |
9,14 |
22,6 |
- |
19,1 |
22,1 |
- |
38,1 |
F |
97,0 |
79,0 |
35,1 |
21,3 |
23,6 |
18,0 |
18,0 |
10,7 |
23,1 |
- |
23,1 |
24,9 |
- |
50,8 |
G |
105 |
89,5 |
38,1 |
25,4 |
25,4 |
22,4 |
22,4 |
14,0 |
25,4 |
- |
28,7 |
26,2 |
- |
51,0 |
H |
119 |
101 |
41,4 |
28,7 |
28,7 |
23,9 |
23,9 |
14,7 |
27,7 |
- |
31,8 |
29,5 |
- |
50,8 |
I |
147 |
122 |
51,0 |
36,6 |
37,3 |
33,3 |
33,3 |
18,3 |
34,5 |
25,4 |
39,6 |
38,9 |
38,1 |
63,5 |
J |
187 |
159 |
63,5 |
46,0 |
44,5 |
42,2 |
42,2 |
22,9 |
40,9 |
33,3 |
51,0 |
49,8 |
47,8 |
76,2 |
K |
230 |
189 |
76,0 |
57,0 |
58,0 |
47,8 |
41,4 |
28,2 |
53,0 |
46,0 |
62,0 |
62,5 |
57,2 |
102 |
L |
256 |
211 |
82,5 |
66,0 |
63,5 |
55,5 |
49,3 |
32,3 |
57,5 |
51,0 |
72,0 |
66,5 |
58,7 |
102 |
N |
318 |
262 |
108 |
76,0 |
84,0 |
68,5 |
60,5 |
39,6 |
76,5 |
69,9 |
89,0 |
72,0 |
65,0 |
127 |
О |
357 |
346 |
127 |
92,0 |
102 |
76,0 |
76,2 |
44,5 |
82,5 |
- |
89,0 |
87,5 |
- |
165 |
P |
462 |
357 |
137 |
116 |
108 |
102 |
81,0 |
51,0 |
76,0 |
- |
114 |
98,5 |
- |
178 |
S |
511 |
392 |
152 |
129 |
121 |
114 |
82,6 |
55,4 |
86,0 |
- |
125 |
121 |
- |
203 |
T |
602 |
470 |
178 |
152 |
146 |
140 |
99,3 |
64,3 |
105 |
- |
145 |
145 |
- |
254 |
* Carbon eye hooks .75tC-40tC: proofload is 2 times working load limit. Designed with a 5 to 1 safety factor.
Alloy eye hooks 1.25tA-31.5tA : proofload is 2.5 times working load limit. Designed with a 4 to 1 safety factor.
Alloy eye hooks 37tA - 60tA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.
† 3/4tC - 22tA dimensions shown are for S-4320 Latch Kits. Dimensions for sizes 20 ton carbon and larger are for PL Latch Kits.
†† Dimensions are for PL-N latch kits.
|