G-402 Regular Swivels
- Hot dip Galvanized
- Quenched & Tempered
- Crosby products meet or exceed all requirements of ASME B30.26 including identification,
ductility, design factor, proof load and temperature requirements. Importantly, Crosby products
meet other critical performance requirements including fatigue life, impact properties and material
traceability, not addressed by ASME B30.26.
401, 402 and 403 swivels are positioning devices and are not intended to rotate under load. For load swivels see pages 111-115.
Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000. |
G-402
Regular Swivels
• Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 2, except for
those provisions required of the contractor. For more information, see page 361.
Size
(mm) |
G-402
Stock No. |
Working
Load Limit
(t)* |
Weigh
Each
(kg) |
Dimensions
(mm) |
| А |
В |
С |
D |
J |
М |
R |
S |
| 6 |
1016019 |
,39 |
,10 |
31,8 |
17,5 |
19,1 |
26,9 |
17,5 |
7,85 |
74,5 |
42,9 |
| 8 |
1016037 |
,57 |
,18 |
41,4 |
20,6 |
25,4 |
31,8 |
20,6 |
9,65 |
90,0 |
52,0 |
| 10 |
1016055 |
1,02 |
,32 |
51,0 |
23,9 |
31,8 |
38,1 |
25,4 |
12,7 |
109 |
63,5 |
| 13 |
1016073 |
1,63 |
,60 |
63,5 |
33,3 |
38,1 |
51,0 |
33,3 |
16,0 |
138 |
81,0 |
| 16 |
1016091 |
2,36 |
1,13 |
76,0 |
39,5 |
44,5 |
60,5 |
38,1 |
19,1 |
167 |
98,5 |
| 19 |
1016117 |
3,27 |
1,82 |
89,0 |
44,5 |
51,0 |
67,0 |
47,8 |
22,4 |
183 |
109 |
| 22 |
1016135 |
4,54 |
2,83 |
102 |
52,0 |
57,0 |
77,5 |
54,0 |
25,4 |
213 |
127 |
| 25 |
1016153 |
5,67 |
4,06 |
114 |
58,5 |
63,5 |
89,0 |
60,5 |
28,7 |
245 |
146 |
| 32 |
1016199 |
8,16 |
7,42 |
143 |
68,5 |
79,5 |
93,5 |
76,0 |
38,1 |
291 |
172 |
| 38 |
1016215 |
20,5 |
20,8 |
178 |
98,5 |
102 |
106 |
102 |
57,0 |
435 |
254 |
* Ultimate Load is 5 times the Working Load Limit.
|
