SHACKLES - APPLICATION INFORMATION
|
|
Round Pin Shackles can be used in tie down, towing, suspension or lifting applications where the load is strictly applied in-line. |
G/S-213 |
G/S-215 |
|
|
|
G-209 A |
G/S-209 |
G/S-210 |
| Screw Pin Shackles can be used in any application where a round pin shackle is used. In addition, screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications. While in service, do not allow the screw pin to be rotated by a live line, such as a choker application. |
|
|
|
|
G/S-2130 |
G/S-2150 |
G/S-2140 |
G-2160 |
| Bolt-Type Shackles can be used in any applications where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate. |
|
QUIC-CHECK® INFORMATION
All Crosby Shackles, except for G-2160's incorporate markings forged into the product which address an easy QUIC-CHECK® feature. Angle indicators are forged into the shackle bow at 45° angles from vertical. These are utilized to quickly check the approximate angle of a two-legged hitch or quickly check the angle of a single leg hitch when the shackle pin is secured and the pull of the load is off vertical or side loaded, thus requiring a reduction in the working load limit of the shackle. |
|
G-2130 |
|
|
|
