HOOK CONNECTORS Golden Gate Hooks
The 6 connector styles shown below make it possible for Crosby to furnish a Golden Gate Hook to fit almost any make or model of hoisting equipment including American Engineering Lo-Hed, ARO, Coffing, Electro Lift, Ingersoll-Rand, P & H, Robbins and Myers, Shepard Niles, CM, Shaw-Box, Wright, Yale & Towne.
|
CLOSED SWIVEL BAIL |
SHANK -TYPE HOOK
(Standard Length) |
SHANK -TYPE HOOK
(Long Length) |
|
For use where hoisting line or shackle can be inserted into the bail. |
For use on existing load blocks, with standard shank length. Hook sizes: 2 through 14. |
For use on existing load blocks requiring extra shank length. t. Hook sizes:
4 through 17. |
|
|
|
|
Style C — with self-closing gate.
Style A — with manual-closing gate. |
Style D — with self-closing gate.
Style B — with manual-closing gate. |
Style K — with self-closing gate.
Style I — with manual-closing gate. |
| |
|
UNIVERSAL TYPE |
LINK CHAIN NEST |
ROLLER CHAIN NEST |
|
Open swivel bail for attachment
to link chain.
Suitable for infrequent,
non continuous rotation
under load. Hook size:
3, 4 and 5. |
With ball-bearing swivel; attaches to chain by an alloy pin. Suitable for frequent rotation under load. H ook sizes:
4, 5 and 7. |
Attachment with ball-bearing swivel
and full-floating connector.
Suitable for
frequent rotation
under load.
Hook sizes: A K
4, 5 and 6. |
|
|
|
|
Style E — with self-closing gate.
Style G — with manual-closing gate. |
Style O — with self-closing gate.
Style P — with manual-closing gate. |
Style S — with self-closing gate.
Style R — with manual-closing gate. |
Letter designations shown beneath each illustration above indicate BOTH connector style and gate type. Each connector is available with either a self-closing or manual-closing gate. (e.g.: A size 4 hook with a closed swivel bail connector and self-closing gate is 4-C; with manual-closing gate, it is 4-A.)
| Brass alloy Golden Gates® are engineered for quality, easy handling and dependability. The heavy duty, corrosion resistant locking mechanism will stay locked until an operator releases it; yet, can easily be shut with one hand. Cost effective, these gates reduce down time, providing the alternative to conventional latches. |
LIF-LOK® |
ROLLOX® |
|
|
PIN-LOK® |
TIP-LOK® |
|
|
| LIF-LOK® GATE - Size 1 |
ROLLOX® GATE - Sizes 5 through 9 |
To lock: close the gate; the built-in spring locks the gate against the hook tip.
To unlock: lift the gate upward on the hook shank and swing open. |
To lock: close the gate; a stainless steel pin is mounted in a horizontal bore which passes through the gate and engages a notch milled in the hook shank.
To unlock: move the lever downward a quarter-turn or until it stops, the gate can now swing open 160° (ap-prox.) |
| PIN-LOK® - Size 2 through 4 |
TIP-LOK® GATE - Sizes 10 through 17 |
To lock: close the gate; a stainless steel pin is carried in a horizontal bore and engages a milles slot in the hook shank.
To unlock: simply depress the stainless steel pin which causes the pin to disengage from the milles slot. |
To lock: press the arm down until the lock trips; two arms ofthegatenowenclosethetipofthehook.
To unlock: manually depressing the locking trigger automatically raises the movable arm, allowing the gate to be rotated open. |
|
