Sanger Metal
Main Page > Products > > S-319 / S-319N Crosby® Shank Hooks

S-319 / S-319N Crosby® Shank Hooks



S-319 / S-319N
 
  • Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features.

• Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align according to the dimensions in column "AA" on next page. If the measurement does not meet this criteria, the hook should be inspected further for possible damage.

• Angle Indicators -- Indicates the maximum included angle which is allow between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

  • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.

Patented trademark indicates QUIC-CHECK® product.

Hook ID Codes: A-Alloy Steel, B-Bronze High Strength, C-Carbon Steel.

 

 

Working Load Limit
(t)*

Hook
ID
Code

Shank Hooks Stock No.

Shank
Length
++

Weight
Each
(kg)

Rep. Latch Kits

Carbon

Alloy

Bronze

Carbon
S-319CN

Alloy
S-319AN

Bronze
S-319BN

S-4320 Stock No.

PL Stock No.

SS-4055 Stock No.

3/4

1.25

.5

D

+1028505

1028701

1028900

Std.

.23

1096325

-

-

1

1.6

.6

F

+1028514

1028710

1028909

Std.

.34

1096374

-

-

1.6

2.5

1

G

+1028523

1028723

1028918

Std.

.45

1096421

-

-

2

3.2

1.4

H

+1028532

1028732

1028927

Std.

.83

1096468

-

-

3.2

5.4

2

I

+1028541

1028741

1028936

Std.

1.67

1096515

1092000

-

5

8

3.5

J

+1028550

1028750

1028945

Std.

3.29

1096562

1092001

-

7.5

11.5

5

K

+1028563

1028765

1028954

Std.

6.12

1096609

1092002

-

10

16

6.5

L

+1028572

1028774

1028963

Std.

8.16

1096657

1092003

-

15

22

10

N

+1028581

1028783

1028972

Std.

16.0

1096704

1092004

-

20

30

-

O

1024386

1024803

-

Std.

32.7

-

1093716

1090161

20

30

-

O

1024402

1024821

-

Long

38.8

-

1093716

1090161

25

37

-

P

1024420

1024849

-

Std.

61

-

1093717

1090189

25

37

-

P

1024448

1024867

-

Long

78

-

1093717

1090189

30

45

-

S

1024466

1024885

-

Std.

83

-

1093718

1090189

30

45

-

S

1024484

1024901

-

Long

97

-

1093718

1090189

40

60

-

T

1024509

1024929

-

Std.

122

-

1093719

1090205

40

60

-

T

1024545

1024965

-

Long

142

-

1093719

1090205

50

75

-

U

1024563

1024983

-

Std.

177

-

1093720

-

50

75

-

U

1024581

1025009

-

Long

193

-

1093720

-

-

100

-

W

-

1025027

-

Std.

277

-

1093721

-

-

100

-

W

-

1025045

-

Long

306

-

1093721

-

-

150

-

X

-

1025063

-

Std.

333

-

1093721

-

-

200

-

Y

-

1025081

-

Std.

463

-

1093723

-

-

300

-

Z

-

1025090

-

Std.

630

-

1093724

-

* NOTE: Proof load is 2 times Working Load Limit. All carbon hooks - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy shank hooks 1.25 ton through 300 ton - average straightening load (ultimate load) is 4 times Working Load Limit. All bronze hooks-average straightening load (ultimate load) is 4 times Working Load Limit.

+ New 319N style hook.

++ See column "Y" on following page for actual length.

 

  • The most complete line of shank hoist hooks. Available 3/4 to 300 tons.
  • Available in carbon steel, alloy steel, and bronze.
  • Quenched and Tempered.
  • Proper design, careful forging, and precision controlled quench and tempering give maximum strength without excessive weight and bulk.
  • Every Crosby Shank Hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added.
  • Hook Identification code stamped on each hook.


Hook
ID
Code

Dimensions
(mm)

D

F

G

H

J

K

L

M

O

O2 ++

P

R

T

T2 ++

X *

Y

Z

AA

D

72.5

31.8

18.5

20.6

23.6

16.0

131

16.0

f23.6

-

49.8

59.5

24.6

-

15.0

52.5

17.5

38.1

F

80.5

35.1

21.3

23.9

24.6

18.0

144

18.0

f24.6

-

56.5

66.0

24.6

-

16.8

57.0

19.8

50.8

G

91.0

38.1

25.4

29.5

26.9

22.4

161

22.4

f26.9

-

62.0

70.0

26.2

-

18.3

66.0

22.4

50.8

H

102

41.1

29.0

33.3

30.2

23.9

181

23.9

f29.5

-

70.5

80.5

29.5

-

22.4

72.0

25.4

50.8

I

123

51.0

36.6

41.4

38.1

33.3

219

28.7

f35.8

25.4

88.0

98.0

38.9

38.1

29.5

87.5

31.8

63.5

J

160

63.5

46.2

52.5

45.2

42.2

265

36.6

42.9

33.3

117

121

49.3

47.8

35.8

97.5

39.6

76.2

K

192

76.0

57.5

67.0

61.0

47.8

318

41.4

56.5

46.0

133

149

62.5

57.2

46.0

111

49.3

101

L

212

82.5

66.0

74.5

66.5

55.5

342

49.3

61.0

51.0

151

162

66.0

58.7

51.0

114

55.5

101

N

263

108

76.5

89.0

86.5

68.5

423

60.5

81.0

69.9

175

207

71.5

65.0

65.0

140

67.0

127

O

346

127

92.0

117

102

76.0

586

76.0

82.5

-

223

240

87.5

-

79.0

254

79.0

165

O

346

127

92.0

117

102

76.0

790

76.0

82.5

-

223

240

87.5

-

79.0

457

79.0

165

P

357

137

116

127

108

92.0

816

76.0

76.0

-

287

318

98.5

-

102

381

102

177

P

357

137

116

127

108

92.0

1044

76.0

76.0

-

287

318

98.5

-

102

610

102

177

S

392

152

129

140

121

94.5

867

82.5

86.0

-

319

356

121

-

106

381

106

203

S

392

152

129

140

121

94.5

1095

82.5

86.0

-

319

356

121

-

106

610

106

203

T

470

178

152

165

146

113

916

99.5

105

-

375

395

145

-

114

368

114

254

T

470

178

152

165

146

113

1208

99.5

105

-

375

395

145

-

114

660

114

254

U

524

197

170

184

165

133

1045

108

124

-

420

492

152

-

127

381

127

292

U

524

197

170

184

165

133

1249

108

124

-

420

492

152

-

127

584

127

292

W

584

173

218

251

149

140

1070

140

114

-

438

468

178

-

178

381

178

305

W

584

173

218

251

149

140

1222

140

114

-

438

468

178

-

178

533

178

305

X

619

171

232

278

152

152

1162

152

114

-

457

467

178

-

184

457

184

330

Y

678

191

248

300

168

178

1283

178

127

-

502

521

203

-

203

508

203

330

Z

765

241

270

329

203

184

1389

203

159

-

576

597

210

-

241

508

241

381

* Dimension before machining t 3/4tC - 22tA dimensions s.

Drukuj
Projekt i realizacja, hosting: Stopklatka.pl
www.sangermetal.com