CROSBY Swivel Hooks S-322CN / S-322AN
 |
Forged - Quenched and
Tempered.
Proper design, careful
forging, and precision controlled quench and
tempering gives maximum
strength without excessive weight and
bulk.
Every Crosby Swivel
hoist hook has a pre-drilled cam which can be
equipped with a latch.
Simply purchase the latch assemblies listed
and shown on pages 97-99.
Even years after purchase of the original
hook, latch assemblies
can be added.
Low profile hook tip
designed to utilize Crosby S-4320 or PL-N latch
kit. Simply purchase the
latch assemblies listed and shown on pages
97-98. Even years after
purchase of the priginal hook, latch assemblies
can be added.
Load rating codes stamped
on each hook. 322 Swivel Hooks use the
same load rating code
as 319 Shank Hooks, see page 88 for proper
Hook Identification Codes.
Hoist hooks incorporate
markings forged into the product which
address two (2) QUIC-CHECK®
features:
Deformation
Indicators --
Two strategically placed marks,
one just below the shank
or eye and the other on the hook
tip, which allows for
a QUIC-CHECK®
measurement to
determine if the throat
opening has changed, thus indicating
abuse or overload.
Angle
Indicators —
Indicates the maximum included angle
which is allowed between
two (2) sling legs in the hook. These
indicators also provide
the opportunity to approximate other
included angles between
two sling legs.
This hook is a positioning
device and is not intended to rotate under load. For swivel
hooks designed to rotate under load, see pages 93, 95,
103, 106, 111-115. Use
in corrosive environment requires shank and nut inspection
in accordance with ASME B30.10-1.2.1(b)(2)(c) 2000.
U.S. Patents 5,381,650 & 5,193,480 & 5,103,755
and foreign equivalents.
Carbon swivel hooks .75tC-15tC:
proof load is 2 times working load limit.
Designed with a 5 to 1
safety factor.
Alloy swivel hooks 1.25tA-31.5tA
: proof load is 2.5 times working load limit.
Designed with a 4 to 1
safety factor.
† Dimensions for hooks
3/4 ton carbon thru 22 ton alloy are for S-4320 latch kits.
Dimensions for hooks 31.5
ton alloy are for PL latch kit.
Working Load
Limit
DOR(t)* |
NrM
Carbon S-332CN Stock No. |
NrM.
Carbon S-332AN Stock No. |
Weight Each
(kg) |
Dimensions (mm) |
carbon |
Alloy |
A |
B |
C |
D |
F |
G |
H |
J |
K |
L |
M |
O |
R |
S |
AA |
0.75 |
1.25 |
1048600 |
1048804 |
0.34 |
51.0 |
20,8 |
31,8 |
72,5 |
31,8 |
18,5 |
20,6 |
23,6 |
16,0 |
144 |
16,0 |
23,6 |
116 |
9,65 |
38,1 |
1 |
1.60 |
1048609 |
1048813 |
0.57 |
63.5 |
33,3 |
38,1 |
80,0 |
35,1 |
21,3 |
23,9 |
24,6 |
18,0 |
170 |
18,0 |
24,6 |
136 |
12,7 |
50,8 |
1.6 |
2.50 |
1048618 |
1048822 |
1.02 |
73.0 |
38,1 |
44,5 |
91,0 |
38,1 |
25,4 |
29,5 |
26,9 |
22,4 |
197 |
22,4 |
26,9 |
155 |
16,0 |
50,8 |
2 |
3,20 |
1048627 |
1048831 |
1.04 |
73.0 |
38,1 |
44,5 |
102 |
41,1 |
28,7 |
33,3 |
30,2 |
23,9 |
210 |
23,9 |
29,5 |
165 |
16,0 |
50,8 |
3,2 |
5,4 |
1048636 |
1048837 |
2.25 |
89.0 |
41,7 |
50,8 |
123 |
51,0 |
36,6 |
41,4 |
38,1 |
33,3 |
246 |
28,7 |
35,8 |
191 |
19,1 |
63,5 |
5 |
8.0 |
1048645 |
1048854 |
4.67 |
116 |
58,0 |
63,5 |
160 |
63,5 |
46,0 |
52,5 |
45,2 |
42,2 |
317 |
36,6 |
42,9 |
245 |
25,4 |
76,2 |
7.5 |
11.5 |
1048654 |
1048865 |
7.34 |
127 |
64,5 |
70,0 |
192 |
76,0 |
57,0 |
67,0 |
51,0 |
47,8 |
375 |
41,4 |
56,5 |
289 |
28,7 |
101 |
10 |
16 |
1048666 |
1048877 |
10.5 |
143 |
63,0 |
79,0 |
212 |
82,5 |
66,0 |
74,5 |
66,5 |
55,5 |
417 |
49,3 |
61,0 |
311 |
31,8 |
101 |
15 |
22 |
1048672 |
1048886 |
21.3 |
180 |
95,5 |
104 |
263 |
108 |
76,0 |
89,0 |
86,5 |
68,5 |
542 |
60,5 |
81,0 |
424 |
38,1 |
127 |
- |
31.5 |
- |
1048688 |
32.0 |
180 |
95,5 |
104 |
346 |
127 |
93,0 |
118 |
102 |
72,5 |
590 |
76,2 |
82,6 |
459 |
38,1 |
165 |
* NOTE: Carbon swivel hooks ,75tC-15tC: proofloads is 2 times
working load limit. Designed with a 5 to 1
safety factor. Alloy swivel hooks 1,5tA-22tA: proofload is
2,5 times working load limit. Designed with
a 4 to 1 safety factor.
Alloy swivel hooks 31.5LA: proofload is 2 times working load
limit. Designed with
a 4 to 1 safety factor.
|
