Main Page > Products > CLAMPS AND GRABS > IPHTONZ/IPHSZ - HORIZONTAL TRANSPORT OF PLATES: NON SAGGING

IPHTONZ/IPHSZ - HORIZONTAL TRANSPORT OF PLATES: NON SAGGING

Model IPHTONZ

The IPHTONZ and IPHSZ horizontal safety lifting clamps are suitable for the lifting and transfer in horizontal position of non-sagging steel plates. Light-weight clamp.

The IPHTONZ/IPHSZ lifting clamps may also be used hanging vertically under a spreader beam.

The IPHSZ is equal to the IPHTONZ but with a higher jaw aperture.

For correct use of the clamp, please consult fig. 2 & 3. Higher WLL and different jaw-apertures upon request.

Model IPHTONZ

Before using the clamp always read the instruction manual supplied with the clamp.

Model	Order No.	WLL per pair in L.	Jaw	Dimensions in mm									Weight per pair kg
Model	Order No.	WLL per pair in L.	A	B	C	D	E	F	G	H	J	K	Weight per pair kg
0,75-IPHTONZ	5343	0,75	0-30	75	16	-	16	64	118	81	12	46	4,0
1,5-IPHTONZ	5344	1,5	0-60	114	16	-	22	87	153	110	16	52	9,0
3-IPHTONZ	5477	3,0	0-60	117	20	-	26	87	163	120	20	69	14,0
4,5-IPHTONZ	5483	4,5	0-60	132	25	-	30	87	183	130	20	69	20,0
6-IPHTONZ	5484	6,0	0-60	143	25	-	36	96	213	130	20	69	25,0
9-IPHTONZ	5485	9,0	0-60	157	30	-	43	110	223	140	25	86	31,0
12-IPHTONZ	5486	12,0	0-60	172	30	-	47	120	254	150	25	88	41,0
15-IPHTONZ	5487	15,0	0-60	183	30	-	47	130	284	200	25	88	54,0
25-IPHTOZ	5119	25,0	0-60	169	40	-	47	170	300	220	32	113	78,0

3-IPHSZ	5308	3,0	0-100	192	20	-	26	160	222	140	20	65	22,0
6-IPHSZ	5311	6,0	0-100	200	25	-	32	160	249	180	20	69	36,4
9-IPHSZ	5313	9,0	0-100	220	30	-	35	170	270	190	25	85	49,2
12-IPHSZ	5318	12,0	0-100	220	35	-	47	170	270	200	25	95	62,8

Spare parts for IPHTONZ and IPHSZ safety lifting clamps:	Order no.
1. body complete	1041
3. camsegment complete	1234
6. camsegment shaft complete	1046